Add:No.16,Lane 8 Xinle village Xixiang street,Baoan District, Shenzhen, Guangdong, China 518105
Contact Person: Paul Fan
Mobile: +86 139 2847 2576
Skype: Youde-prototype Paul
Add: Room 301-7A,3/F HongKong Trade Center 161-167 Des Voeux road, Central,HK
Youde Prototype Co.,Ltd is a professional sls rapid prototyping company and we are also one of the best China sls rapid prototyping manufacturers and suppliers with one of the famous brands, our factory is able to produce newest and best sls prototyping, sls printen services with high quality....
Youde Prototype Co.,Ltd is a professional sls rapid prototyping company and we are also one of the best China sls rapid prototyping manufacturers and suppliers with one of the famous brands, our factory is able to produce newest and best sls prototyping, sls printen services with high quality. Welcome to buy cheap or wholesale discount products from us.
Selective Laser Sintering (SLS) is an additive manufacturing (AM) technique that uses a laser as the power source to sinter powdered material (typically metal), aiming the laser automatically at points in space defined by a 3D model, binding the material together to create a solid structure. It is similar to direct metal laser sintering (DMLS); the two are instantiations of the same concept but differ in technical details. Selective laser melting (SLM) uses a comparable concept, but in SLM the material is fully melted rather than sintered, allowing different properties (crystal structure, porosity, and so on). SLS (as well as the other mentioned AM techniques) is a relatively new technology that so far has mainly been used for rapid prototyping and for low-volume production of component parts. Production roles are expanding as the commercialization of AM technology improves.
Materials and applications
Some SLS machines use single-component powder, such as direct metal laser sintering. Powders are commonly produced by ball milling. However, most SLS machines use two-component powders, typically either coated powder or a powder mixture. In single-component powders, the laser melts only the outer surface of the particles (surface melting), fusing the solid non-melted cores to each other and to the previous layer.
Compared with other methods of additive manufacturing, SLS can produce parts from a relatively wide range of commercially available powder materials. These include polymers such as nylon (neat, glass-filled, or with other fillers) or polystyrene, metals including steel, titanium, alloy mixtures, and composites and green sand. The physical process can be full melting, partial melting, or liquid-phase sintering. Depending on the material, up to 100% density can be achieved with material properties comparable to those from conventional manufacturing methods. In many cases large numbers of parts can be packed within the powder bed, allowing very high productivity.
If you are interest our services and be suited for your project, please send a drawing to us, the quotation will be submitted within 24H. Click here:Info@youde-prototype.com, E-mail us,Try Now !!!!